Description
Wagner Tuning MFD32 digital display for the VW Golf 7 (Golf R Mk7), with a custom-made bezel.
A data display adds a second gauge cluster fed by the car's own CAN bus data, plus any extra sensors wired to its analog inputs. It can show values the factory cluster hides, and it can log them for review, but it reports data and does not change how the car runs. Wagner says the display reads the data over CAN bus and fits the Golf 7 with a vehicle-specific bezel.
Specifications
- Reads up to 128 sensors; 10 customizable display modes through DSS
- Pre-installed display modes and a plug-and-play cable set
- Optional glare protection (Wagner)
- Reads and clears engine control unit error messages (Wagner)
- Reads vehicle data over the CAN bus; sensor values appear on the display
- 4 additional analog inputs (linear 0-5 V and NTC sensors) and an ethanol-sensor input
- Logging to the internal SD card
- Built-in performance meter: 0-100, 100-200 and 0-200 times
- Customizable alarms, for example a warning above 900 °C exhaust gas temperature
- Setup through Wagner's Display Setup Software (DSS)
Before you order
- Wagner lists left-hand-drive Golf 7 models; a right-hand-drive version is listed by Wagner as in development.
- Confirm model and year against the fit table before ordering.
Fits these vehicles
Pick the options that match your car above. Not sure it fits? Ask us before you order.
Not sure it's right for your build?
Get a straight answer
Tell us what you drive and what you're planning, and we'll tell you what fits and what to pair it with.
